Can Door Frame Pullup Bars Be Trusted?

Here's how to repair the screen: 1. Go to your local DIY or hardware store and purchase a roll of replacement screen material (black or gray which may come with a rubber spline also) and a spline roller. This is a little plastic tool with wheels on either end. 2. Remove the screen door from the door frame by unscrewing the hinge screws. Lay the screen door on a table. 3. Carefully remove the rubber spline from the screen door frame (find the end and start there by pulling it out from around the frame. 4. Remove old screen and discard. 5. With another person helping you, unroll the new screen over the top of the screen door frame and work the spline into the groove, starting at the top right or left corner. Do the spline along the top first. 6. Once the spline is in the groove along the top, stretch the screen tight at the bottom and keep rolling the spline down the side, working any wrinkles out of the screen as you go along. 7. Finish by completing the insertion of the spline all the way around the frame, making sure that the new screen is nice and tight. 8. Reinstall screen door in door frame. 9. Watch out for squirrels!

2. What is the metal part on the door frame called?

stiker plate

3. My car door freezes shut in cold weather. Is there anything I can coat the door frame with to prevent this?

You are right about using the silicone. I prefer to use a spray. If there are perforations (little drain holes) around the weather stripping, use a silicone-based aerosol lubricant (like WD-40) that comes with a pipe/tube that fits onto the spray can. Insert it into the holes all around the weatherstripping and spray for 3-4 seconds in each hole (a lot of the spray will soak right into the rubber from the inside). This will prevent freezing for a longer time between applications. Also, apply a light spray to the exterior of the weatherstripping as well. If you do this, you should only have to repeat the process 1-2 times over a winter.

4. How can I stop my dog chewing the skirting board and door frame?

Door Skirting

5. What is the average inside height of an elevator door frame?

Standard door 7'-0". Per the BOCA National Building Code, the International Building Code, the Standard Building Code, and the Uniform Building Code